LCD Screen Cover for UPS PowerShield Defender PSD650
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
UPS manufacturers still doing bright displays that are awful during nights...
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 7
- Makes
- 0
- Views
- 35
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Share Alike
I have no idea why on UPS that work 24/7 manufacturers still doing bright displays that are not turning off after some time.
The LCD on PowerShield Defender 600 is very bright during nights so I modelled a simple cover for the screen and button and attached it to the UPS using two sided sticky tape (it should be 1mm or thicker).
OrcaSlicer 3mf project file with settings I used for printing and STEP file are included.
I printed it on Elegoo Neptune 4 in black Jayo PLA+ (grey that I tried not blocking all the light) with the following settings:
- No supports
- Layer height 0.2mm
- Line width 0.6mm
- Infill 15%
- Temperatures 220/60
- Speed ~120mm/s
P.S This is my first print in place design with moving parts so it is highly possible that it could be done better. However it works fine for my application.
Category: Household