1 / 9
Samsung Galaxy S8 Flexible case with buttons (import from thingiverse) — image 1
1 / 9

Samsung Galaxy S8 Flexible case with buttons (import from thingiverse)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A Samsung Galaxy s8 case with buttons to be printed with flexible filament. CC-BY from casiopea987

Rating
0 / 5
Likes
7
Downloads
69
Makes
1
Views
167
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

Samsung Galaxy S8 Flexible case with buttons by casiopea987 is licensed under the Creative Commons - Attribution license.

Summary

A Samsung Galaxy s8 case with buttons to be printed with flexible filament. The case is pretty thick so it'll protect your phone very well. I also have cases for the iPhone X/XS/XSMax/XR, 5/5S/SE, 6S/7/8 and a few other phones :)

There are two STLs: V5 is a normal case and V5_Hex has a honeycomb pattern. I would recommend scaling them to 99% or 99.5% in your slicer (especially if you are printing the hex case or using a very flexible filament, such as Ninjaflex).

If you print this case, please post a picture or review of it in the "Made" section, that way I can keep improving the case. I try to make the perfect case and am always open to feedback!

Credit: Michael Prischink printed the orange case with the SpaceX logo: https://www.thingiverse.com/hielvis

Print Settings

  • Printer brand:

Creality

  • Printer:

Ender 3

  • Rafts:

No

  • Supports:

No

  • Resolution:

0.24mm

  • Infill:

100% or infinite bottom layers

  • Notes:

I used infinite bottom layers (or you can also use 100% infill). I would recommend scaling the case to 99% or 99.5% in your slicer (especially if you are printing the hex case or using a very flexible filament, such as Ninjaflex).

Optional 1: I also used 4 walls. It just makes sure the nozzle doesn't move the flexible sides back and forth while printing and ensures better quality, but is not 100% necessary.

Optional 2: I personally had the most success printing on glass and using a brim of 15-20 lines because I couldn't get the cases to stick otherwise.

Post-Printing

Buttons too stiff?

 

I iterated the case many times and the buttons should now be near perfect. However, in case your buttons are still too stiff or just don't click very well, you can try cutting slits just above and below each button as shown below. I did this with my first few iterations and it worked pretty well.

Summary

A Samsung Galaxy s8 case with buttons to be printed with flexible filament. The case is pretty thick so it'll protect your phone very well. I also have cases for the iPhone X/XS/XSMax/XR, 5/5S/SE, 6S/7/8 and a few other phones :)

There are two STLs: V5 is a normal case and V5_Hex has a honeycomb pattern. I would recommend scaling them to 99% or 99.5% in your slicer (especially if you are printing the hex case or using a very flexible filament, such as Ninjaflex).

If you print this case, please post a picture or review of it in the "Made" section, that way I can keep improving the case. I try to make the perfect case and am always open to feedback!

Credit: Michael Prischink printed the orange case with the SpaceX logo: https://www.thingiverse.com/hielvis

Print Settings

  • Printer brand:

Creality

  • Printer:

Ender 3

  • Rafts:

No

  • Supports:

No

  • Resolution:

0.24mm

  • Infill:

100% or infinite bottom layers

  • Notes:

I used infinite bottom layers (or you can also use 100% infill). I would recommend scaling the case to 99% or 99.5% in your slicer (especially if you are printing the hex case or using a very flexible filament, such as Ninjaflex).

Optional 1: I also used 4 walls. It just makes sure the nozzle doesn't move the flexible sides back and forth while printing and ensures better quality, but is not 100% necessary.

Optional 2: I personally had the most success printing on glass and using a brim of 15-20 lines because I couldn't get the cases to stick otherwise.

Post-Printing

Buttons too stiff?

 

I iterated the case many times and the buttons should now be near perfect. However, in case your buttons are still too stiff or just don't click very well, you can try cutting slits just above and below each button as shown below. I did this with my first few iterations and it worked pretty well.

Tags