Counting matching models…
Warning! The TS80 insert with large cable compartment was uploaded with the wrong dimensions. Don’t print it if you have downloaded it before 28/2/2023. A new version has been uploaded with the right dimensions. Design I've created my…
Doubled the thickness of the base so that it can fit a second insert, and therefore all 7 tips
Saw different versions of the stand and decided to combine a few ideas and create a new version: Reinforced Stability: Thickened the stand's design, ensuring it remains securely in place. Effortless Removal: Added grip makes detaching the…
Print both files from this model, the rest of the files can be used from the original model. If you have any question, feel free to contact me.
My design of powerbank based on chinese pcb and 1s8p pack from my previous powerbank. Main body is designed to be printed standing with display hole on top. To fix parts together you need 4-6 m3 screws with cone head.
Breville / Sage Barrista Grinder Gear. Supported models: Express (BES875) - tested Touch (BES880) - confirmed by others These are not available as a separate spare part from Breville (Sage), but are the first to fail if the grinder gets…
Originally published here: (WIP) Samsung Galaxy S8 g950 case by tato_713 - Thingiverse Thanks to the user pictorf for testing the test case for this phone. This test case was made for the regular Samsung Galaxy S8; for the S8+ see this ;…
Modify the Omnifixo design you have on Thingiverse , because the TS80P didn't quite fit. In addition I have designed a reel to contain the solder. The idea is to carry some of the things you need for a solder session out of the workshop.…
I had a few issues with the existing version of the stand for @termiman's and @PjotrStrog's soldering iron cases. The stand was a loose fit in the case when stored, causing it to fall out, and it was slightly fiddly to remove. The stand…
A small container for flux paste. Fits in the unused space above the tips for the Top Large insert. Use some glue to secure the box to the insert. Find the case here:…
This component is a small plastic hinge buckle plate that fits at the headband-to-earcup joint of the Corsair HS80 and HS80 Max headsets. It provides essential mechanical support. The original part is prone to cracking, but this…
The TS80p is the soldering iron with the best price-performance ratio. Although it is just USB-C powered with a max power consumption of. 30W, it outperforms much higher powered irons. This is achieved by a clever design where the heat is…
This is a remix of PjotrStrog's Rugged Multipart Pinecil/TS100/TS80 (V2) case. I've added the Miniware logo cutout to the large size lid for TS100 and TS80 users.
You might wanna scale the size in the slicer a bit. For me 103-104% scale worked fine. 0.2mm quality layer height 20% infill Grid support on bed Brim
This tray was made in a state of emergency after I received a replacement SIM card and broke the original SIM card tray in the tray slot. Remakes sold on Amazon, AliExpress and others would have taken weeks to arrive, rendering me without…
Grinder of the coffee machine Breville BES860 does not work due to wear of a gear inside gearbox. So I made a new gear to replace the worn one. If possible, it is good to increase the density. But consider printing time. A pin with a…
This small container integrates screw threads and aligns perfectly with the empty space in the upper lid of the rugged Pinecil/TS100/TS80 case. This was designed to be pressure fit without needing to be secured with glue. I can't attest…
Use this top outer shell to label your case for your TS100, TS101, TS80, TS80P, or Pinecil. This is just the outer case. Go to the original model to pickup the inserts and the bottom half of the shell.
I printed and used the Double Layer case remix for my soldering iron and have liked it a lot. My biggest problem with it though was that when fully opened the lid did not sit flush on a table like the base does. To resolve this I made the…
This is a 3D printable cabinet for an 8" powered subwoofer by Deposition Sound LLC. If you have a medium/small living space that is in desperate need of thick, juicy, and fast bass, these are just for you! They have been carefully tuned…
Those 3x1 Gridfinity Boxes will either hold your TS80 or TS80p Soldering Iron and a Tip or just two extra Tips. Note that I redesigned the base of the Boxes to save some material. You should be able to print that without Support even if…
Organizer for 5 tools for Barista Pro. I have model BES878BSS and I don't know if it works for other models, but if you interested, we can try to work it out. You can put it on the warmer surface. I use it for next 5 tools: 53mm Coffee…
This is my first attempt at recreating Blaster from Transformers. It’s not based on a specific version of the character, but it was designed to scale well with Studio Series 86 (SS86) figures. All parts are separated by color for easier…
Wrist Phone holder for Galaxy S8. V9 is more "Screen Accurate" thank you for the excellent screenshot. Helped a lot. It's designed for a phone 80x160x16. So you can scale the model proportionally for whatever size your phone is. The…
Heyho here I have a featherboard for your Festool TKS80. It will slide into the existing profile of the angle guide. There are different options: small_thin = small featherboard with 2 perimeter feathers small_big = small featherboard…
Blocchi cuscinetti lineari SCS6UU - SCS8UU - SCS10UU - SCS12UU - SCS16UU - SCS20UU. Le misure dei modelli SCS_UU sono quelle più di uso comune, e si rferiscono alle misure dei modelli riportati in verde nel file SCS_UU_datasheet.pdf Le…
Changed the parts around latches to make them easier to reach
I decided to create a blank insert to store different things in the Rugged Multipart Pinecil/TS100/TS80 Case. I tested it with @aikano9's remix which allows me to have a multipurpose space on a second level.…
Gridfinity, it's a never ending story and being a noob, I tried to whack together something for my soldering tools. The funny thing? I can't solder very good and can't model very good either xD This stacked kit can keep the following…
I printed the rugged case for my TS100 (https://www.printables.com/model/345083-rugged-multipart-pinecilts100ts80-case-v2) and noticed, that the stand for the soldering iron would not snap securely into the top of the case. Also the…
In case the original stand is too loose for your case you could give a try to this one. It just has a small bulge in the place it connects to the case and that's it.
This center cap was designed to fit a 1998 Volvo v70, but it may also work for other models close in age, such as the 850, S60 and S80 models. The tabs have a tendency to break off because of the layer lines, but I've had pretty good luck…
Description: A small enclosure for a Senseair S8 CO2 sensor and a Wemos D1 Mini ESP board. No supports and no fasteners needed. Everything just slides into place. Tips: Make sure the wiring connects from the wifi-side on the D1, and the…
Just a simple VOLVO keychain I made for my S60 keys. Its the exact length as the P3 key and takes vary little space and filament. Infill: 25% (I used Hexagon infill pattern with 3 walls) Material: ANY (I used SUNLU PLA Matte and it has…
Stepper Motori. Serie 17HS2408 - 17HS3401 - 17HS4401 - 17HS8401 - 17HS6401. Creati con solidworks con passaggio semplificato*. per le misure complete consultare il file in allegato Step motor_datasheet.jepg Sono inclusi file solidworks…
This modification allows WS8 implementation to SP-5. For nut, you should use nut adapter. https://github.com/MirageC79/Interfaces-for-WobbleX-integration/blob/main/Voron/Trident/WobbleX_TR8_Adapter%20Body.stl
This is a housing for: Wemos D1 Mini / ESP8266 ESP-12 0,96" OLED Display I2C SSD1306 CO2: Senseair S8 as well as MH-Z19 is fitting I've soldered a BMP280 and a SHT21 for temperature and humidity together Used DuPont cables Many…
Holder uses 608 bearing, M3 Square Nut and Bolt.
Still Working on Wreckers Armor, but couldn't help through this one up. Note the greebleys arent attached, but I'm thinking your software should separate them out easy enough. Other wise Ill chuck a separate file up. Just My internet is…
GRIFF GEFRIERFACHKLAPPE für PKM Kühlschrank / Gefrierschrank KS823AUB ( KS82.3A UB ) 20867 KS82.3A+UB
Parts list: Battery contacts: 100 stücke Batteries chrapnell aa oder aaa Batterie feder 5 Nr. Positive und negative Metall batterien Feder kontakt platte ersetzen - AliExpress 13 Power outlet connector: ( Male and female) 1 Stück 5,5 x…
Securely holding the bearing @@ omgwowbbq
Shalom folks, Not being able to upgrade the S8 to the S8+ Auto Empty Station pissed me of so if you're the proud owner of a Roborock S8 and wish to make use of the readily available AutoEmpty Station designed for the Roborock S7, I've got…
The tiny dang thing went flying basically the second I opened the box, so I took out the calipers and made a new one. OpenSCAD File included if you want to change how it fits if you need it for a different device. It's small enough that…
SS86 Megatron is basically perfect, except for that hideous Fusion Cannon. The proportions for the Hasbro one are so off, it makes him look silly. So, I fixed it. I designed and 3D printed an animation-accurate fusion cannon. It can't…
A stand to place your TS80 soldering iron. I will be very stable as is, but you can weigh it down with some heavy stuff stuck to the underside. I used a sheet of thick lead. The .stl doesn't represent the correct bed orientation. Sponge:…
Cover to hide the bright logo on Yamaha HS5, HS8S (and possibly others) PETG, 0.2mm layers, use supports I printed it with matte black PETG. F3D file is included (suppress the last extrude to get the HS8S model).
No one made an adapter for the WobbleX z-wobble management system, and the basic file doesn't fit in its designed orientation. I've modified the screw positions and hacked off a little of the geometry to give it the clearance it needs.…
Before you go further! This project is for personal use only. Any commercial use is forbidden Follow me on Instagram to keep up with latest designs Check out this project's Instagram - @StawiamKlocki.pl Read FAQ Follow MOC designer on…
Note: it works better if you print it with flex material.
First of all a big thank you to JeepingJohnny and all the predecessors in making these great models. With these models you can use E6000/S80 needles which are much easier to get in Europe. I had some issues with the rounded groove design…
Tolerances of your printer will play big role. In worst case remake the inside part of the model with bracket mounts for the pinecil, make it little bit tighter. Spare height for the solder roll is 2cm. Mine is only 16mm high so I have a…
osVac adapter for Scheppach HMS850 jointer & thickness planer. Thanks to https://www.thingiverse.com/tokenizer for the great Fusion 360 files! Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: No…
Case for TS80 Soldering Iron & Additional Tips . Uses 1.75mm filament for hinges, and 4mmx2mm Round Neodymium Magnets Also have a look at my Fume Extractor & TS100 Case UPDATE v29: Fixes based on input from @4nthonylin . Moved soldering…
A model you can use to show your printer in prusaslicer instead of just a boring flat bed. Just follow these steps: 1. 2. 3. 4. Select the file and you're good to go!
Loved the Winged LCD Knobs but felt all the ones I tried didn't fit the way they needed. Hope this helps you spin to those numbers fast, with a tight locking spin and a nice click!
Holds a .625" diameter x 5.2" long flux pen and a 1.8" diameter solder wick, both easy to get on Amazon.
The stand is designed to click the Miniware TS80P firmly into place. The soldering iron has a permanent place on my desk when it is not in use. In order for me to leave it there even when it's still hot, I've firmly fixed this holder in…
Print settings: 0.2mm layer height 3+ bottom layers and 4+ top layers 4 perimeters w/ 0.6mm nozzle or 6 perimeters w/ 0.4mm nozzle 10+% infill I used PETG. PLA should work fine but I'm not sure about the latch flexibility Specific build…
Screw on panel mount adapter for the high current DC connector (female QS8). The connector is epoxied to it. It is printed out of PETG.
Instead of printing this one, use the updated model: The original model remains below in case anyone needs to replace a part for a mount that is already made. Looking for a new 12-bit scope I saw the new Rigols and liked the idea of the…
Just for the TS80 base and two tips. In my point of view the smallest possible case. Protects them very well because there is at least 2mm of material all around. Size: Length 105.6mm / With 50mm / High 19mm If the case is taff to open,…
These inserts allow use of the TS80 soldering iron and tips in the Rugged Multipart Pinecil/TS100 Case by PjotrStrog . These inserts are made from components in that design and TS100, Pinecil, TS80 & TS80p Case with options, Stand, Solder…
Mounting a E3D Revo Micro on Creality Ender 3 , CR10 , Sunlu S8 and many more printers. Bowden-Setup and Direct-Extruder with Annex Engineering Sherpa Mini ! Silent Setup with 5015 Blower and 40x40 axial Fans. Detailed build instruction…
If you are a fan of heat inserts you can find many use for them ;) Like I did for this excellent “rugged” version of a case for my TS80p. If you don't like the heatinserts, please find the original here:…
Stand for the TS80 with a solder spool holder and space for a tip cleaner. The iron clips securely into the stand but can be easily removed. No hot part of the iron comes into contact with the printed part.
Pour monter facilement les servos HS82MG. Comme toujours, fichier STEP inclus pour vos propres modifications. For easily mount HS82MG Servos. As allways STEP-file included for your own changes. Für eine leichte Montage der HS82MG und HS81…
Onshape link: https://cad.onshape.com/documents/669d8ab3ba28c9b4524ab2e6/w/aef33c5d4f0e49661ce8afa3/e/09eb626dace08d21ae3c6973?renderMode=0&uiState=670aa99a73e99d0f1216ec99 Based on…
Alternative, smaller holder for S830 e-bike LCD, used for example on Samebike LO26. Original holder goes over handlebars and is quite wide. I made this one so i could more easily fit a phone holder on the bars. Uses screws from the…
This goes around the handle of the water tanks on the S8 Pro Ultra, and can clip onto the lid when opened so that you do not have to hold the lid open while filling it up.
This is an insert for the Rugged Multipart Pinecil/TS100/TS80 Case (V2) by PjotrStrog. I modified the original TS100_Pinecil Top Large A insert to fit 4 tips instead of 2. For this I needed to make the cleaning wool compartment smaller,…
Sunlu s8 plus pro, ender 3 board / skr mini e3 adapter with no inserts required. just cut the threads into the plastic
A case and and soldering station for the Miniware TS80p soldering iron. The case snugly fits the soldering iron handle along with three tips. The soldering station accommodates a spool of solder, brass wool tip cleaner, USB-C power cord…
This is a custom insert for @PjotrStrog’s Rugged Multipart Pinecil/TS100/TS80 Case (V2) . It’s designed specifically to fit the TS/T65 Heat Insert Nut Kit for TS101/Pinecil soldering irons. The insert design is based on @irwtdvoys’s Tip…
This case is inspired by this Thingiverse Model . The case was a bit to small for me and had some minor issues. So I modelled my own :) The icon for the Soldering Iron was made by Bakunetsu Kaito and can be found here . — Parts For…
This 18650 case is designed to fit a 3S8P battery with the balance board. There are 2 different designs: The Spacer files are for people that are using the 18650 spacers to make their pack The No Spacer files are for those who are not…
Cable Holder for Märklin S88 / L88 with Ebrom H05V-K 0,5 mm² Used screws: 3x16 Spax Filament: Prusament PLA Jet Black Category: Electronics
Originally published here: (WIP) Samsung Galaxy S8 Active g892 case by tato_713 - Thingiverse Thanks to Eryn Hribal for testing this case. This test case was made for the Samsung Galaxy S8 Active ; the case for the regular S8 is here ;…
Stand for SS86 Swoop for some shelves that I made out of 20mm thick project board. Added a free standing stand.
A "small" remix of Kitlaan's Soldering case. Slightly modified for European power supply and more tips :-). It is use for: The TS80P soldering iron + tip 3 additional tips European power supply USB-C cable Grounding cable Hex L key Like…
ABS/ASA 100% Infill Print in standing up position
(this is not the final version, some of the designs may change, if you incounter a problem with the design, please let me know) Everything is ment to be put together with only M3 screws, nuts and washers, but i havent measured everything…
Housing for Miniware TS80P soldering iron. The housing can be printed with the filler separately, both in the version for flexible materials, where there are smaller tolerances so that the soldering iron does not fall out and holds well…
Holder for a TS80P soldering iron and 4 tips. Remixed from: https://www.thingiverse.com/thing:4631801/files
Wanted to squeeze in syringe with flux, spare tip and power cable, but there was no such option, so I made a remix of inserts. It' compatible with PjotrStrog's rugged case and it's only for TS100.
Charger info: Width: 100mm Thickness: 10mm
Tool used to turn over the engine when doing timing on older BMW engines, or newer engines that are missing the integrated adapter. I might design a version that uses metal inserts or something to strengthen the holes, but worked for me.…
Since getting SS86 Optimus Prime, one of the biggest things we disliked about this otherwise great version was his loose smokestacks which sometimes rotated off when we were posing him. So here's a quick replacement set which can be…
Just a small funnel that helps to fill the water tank of a robot vacuum cleaner. I have specially adapted it to the Roborock S8, the diameter of the opening is 18 millimeters. However, it could also fit other robotic vacuum cleaners.…
This model is a bit wider and scaled to fit the SS86 Optims Prime and KOs of it, i personally did this for my KO SS86 but i thought to share it with every one. For instructions please go on the remix link to give the Creator some views…
[EN] Replacement of the inner part of the case buckle for Nikon Nivo 5.M/Focus6/Focus8/Trimble M3 total station. Tested on Nikon Nivo 5.M case only - see photos. The entire buckle including this inner part can be ordered at…
Remixed from Kai's snap on one piece handle, slightly lengthened the handle and added some guide text. Printed in PETG with 60% infill and 0.2 layer height. Filled with some plaster putty but still tidying it up… functional though!
Jason DS8 monitor stand bracket for a 3d printing , 30 deg view
This is a improovement for this amazing drone. You can use it with 4 holes motors (9x9mm) with increases the motors your can use with it. I also added slots for common battery straps. You can print it 3D with PA12CF15 filament or you can…
This is a protector for Samsung Galaxy's Tab S8 S-Pen, meant to be used with most Tab S8 cases
I've created my personal version of a Rugged Box with Multipart Pinecil/TS100/TS101/TS80 Case. Check the links for the original design. Latches and hinges need M3x16mm screws Print, seal in flex material. For the stand, you'll need a 608…
A shelf to support the Jura S8 Milk Cleaner Container. Fixing a terrible design and now it never falls over (no more messes!) Just glue it to the bottom of the drip tray, and make sure to leave a little gap to assemble the silver shelf…
Enhance your audio experience with this custom-designed speaker stand tailored for the Klipsch KD-51M speakers, featuring a bottom dimension of 150mm x 230mm. Notably, it's also compatible with the Jamo S803 and other speakers with…
