TS80 mini soldering iron case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Just for the TS80 base and two tips. In my point of view the smallest possible case.
- Rating
- 4.667 / 5
- Likes
- 16
- Downloads
- 124
- Makes
- 2
- Views
- 1,300
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Just for the TS80 base and two tips. In my point of view the smallest possible case. Protects them very well because there is at least 2mm of material all around.
Size: Length 105.6mm / With 50mm / High 19mm
If the case is taff to open, then you can shave a bit off at the snap lock.
Made with hard work. Have fun!
pbtec / pb-tec.ch
Not for commercial use!
Print instructions
There are 4 stl files with different gap and with or without TS80 label.
It is intended to print the ones with smaller gap in higher layer resolution. Use Gap 0.3mm for 0.2mm or larger layer. No support needed.