Featherboard for Festool TKS80 (replaceable)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Heyho
here I have a featherboard for your Festool TKS80. It will slide into the existing profile of the angle guide.
There are different options:
small_thin = small featherboard with 2 perimeter feathers
small_big = small featherboard with 4 perimeter feathers
big_base = needed to screw the big featherbord to the aluminium profile (4 x M4 Bolt + Screws needed)
Note: Only the big versions will reach very close to the surface and therefore are usable to cut thin pieces.
big_thin & big_big = same difference as with the small version.
If you use stiff material you can choose the thin variations. Keep in mind that your material is tough enough to avoid breaking.
I tried PLA, PETG and TPU (hard). Until now I prefer PETG as material.
Maybe I´ll design a top version to hold the workpieces down too.
Have fun and keep printin!
PS: Print as massive as you want. 100% infill and 4 perimeters will be the safe way to go ,-)
Update: Added the Version TKS80_Top_Feather as a guide for smaller parts from the side guide.