1 / 3
TS80P Soldering Iron Carrying Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple Carrying Case for the TS80P USB-C Soldering Iron
- Rating
- 4 / 5
- Likes
- 25
- Downloads
- 101
- Makes
- 1
- Views
- 1,708
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
This case is inspired by this Thingiverse Model.
The case was a bit to small for me and had some minor issues.
So I modelled my own :)
The icon for the Soldering Iron was made by Bakunetsu Kaito and can be found here.
—
Parts
For assembly you will need:
2x M3x20mm screws
2x M3 Nuts (I used Locknuts but normal ones should be fine)
2x Neodym magnets 6mm in diameter and 3mm high
—
Assembly
Glue the magnets in the top and bottom parts (used CA glue).
Insert the nuts into the hinges.
Connect the top to the bottom part using the M3 screws