56 models
Modify the Omnifixo design you have on Thingiverse , because the TS80P didn't quite fit. In addition I have designed a reel to contain the solder. The idea is to carry some of the things you need for a solder session out of the workshop.…
I had a few issues with the existing version of the stand for @termiman's and @PjotrStrog's soldering iron cases. The stand was a loose fit in the case when stored, causing it to fall out, and it was slightly fiddly to remove. The stand…
The TS80p is the soldering iron with the best price-performance ratio. Although it is just USB-C powered with a max power consumption of. 30W, it outperforms much higher powered irons. This is achieved by a clever design where the heat is…
Use this top outer shell to label your case for your TS100, TS101, TS80, TS80P, or Pinecil. This is just the outer case. Go to the original model to pickup the inserts and the bottom half of the shell.
Those 3x1 Gridfinity Boxes will either hold your TS80 or TS80p Soldering Iron and a Tip or just two extra Tips. Note that I redesigned the base of the Boxes to save some material. You should be able to print that without Support even if…
Gridfinity, it's a never ending story and being a noob, I tried to whack together something for my soldering tools. The funny thing? I can't solder very good and can't model very good either xD This stacked kit can keep the following…
In case the original stand is too loose for your case you could give a try to this one. It just has a small bulge in the place it connects to the case and that's it.
Holder uses 608 bearing, M3 Square Nut and Bolt.
The stand is designed to click the Miniware TS80P firmly into place. The soldering iron has a permanent place on my desk when it is not in use. In order for me to leave it there even when it's still hot, I've firmly fixed this holder in…
If you are a fan of heat inserts you can find many use for them ;) Like I did for this excellent “rugged” version of a case for my TS80p. If you don't like the heatinserts, please find the original here:…
A case and and soldering station for the Miniware TS80p soldering iron. The case snugly fits the soldering iron handle along with three tips. The soldering station accommodates a spool of solder, brass wool tip cleaner, USB-C power cord…
This case is inspired by this Thingiverse Model . The case was a bit to small for me and had some minor issues. So I modelled my own :) The icon for the Soldering Iron was made by Bakunetsu Kaito and can be found here . — Parts For…
A "small" remix of Kitlaan's Soldering case. Slightly modified for European power supply and more tips :-). It is use for: The TS80P soldering iron + tip 3 additional tips European power supply USB-C cable Grounding cable Hex L key Like…
Housing for Miniware TS80P soldering iron. The housing can be printed with the filler separately, both in the version for flexible materials, where there are smaller tolerances so that the soldering iron does not fall out and holds well…
Holder for a TS80P soldering iron and 4 tips. Remixed from: https://www.thingiverse.com/thing:4631801/files
I've created my personal version of a Rugged Box with Multipart Pinecil/TS100/TS101/TS80 Case. Check the links for the original design. Latches and hinges need M3x16mm screws Print, seal in flex material. For the stand, you'll need a 608…
Soldering iron stand for the TS80P soldering iron. The iron can be dropped in and retained, even with a heavy cable pulling it down it remains seated and will tip the entire stand before removing the iron. ( Although once tipped the iron…
A storage case for the TS80P soldering iron by Miniware. The case has space for the TS80P soldering iron and five interchangeable tips, as well as a couple storage areas for a USB-C cable, tube of solder wire, or whatever else you can…
Modified the stand to hold a smaller (16mm outer diameter) bearing. Reason being this was the bearing I pulled out of a giveaway fidget spinner I found lying around. This does have a smaller hole so the tip will be in the bearing instead…
Remixed jcobgad's original design to fit a TS80P iron Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.3 Infill: 20 Filament: Real PLA Black Post-Printing ============= Category: Electronics
I needed a protective case for my TS80P soldering iron. There are many variants available already, but I was looking for a compact case for the TS80P with one tip only. I couldn't find one which fitted my needs, so I came up with this.…
I got a new soldering iron the TS80P and decided to make up a quick case thats sturdy and tough and keeps the iron tight in the case to protect against being tossed in a bag. The case accommodates (one) TS80P Soldering Iron, The one I am…
Printed with Prusament PETG Jet Black 0.3mm no rafts or supports required.
Simple organizer for holdering TS80P soldering pen with its adapter, cable and up to 4 tips. Features Everything holds tight enough even when organiser is flipped. This is useful when organizer is used as infill for some kind of…
Just a smaller version of the nice TS80P case by Pieterv24 and jcobgad. Small iron likes a small box. It uses 5x2mm magnets to hold the lid closed. I also added the step files, so you can go crazy. All kudoos should goto the original…
A remix of a mount for the ts80s soldering iron
Stores my soldering irons, tips, and accessories. Two versions available, for 1 iron and 4 tips or 2 irons and 6 tips. Might make an alternate version that is more self contained for portability. 65mm x ~120mm x 43mm with 2.5mm wall…
This stand can be attached to the widely used Copper Wire Cleaning Box("ball" diameter is 70mm) with two magnets(8mm diameter, 3mm height). It can be moved around(from horizontal to 45degrees in any direction) but it still keeps in…
Did not include the seal or the soldering iron model. The fit is spot on (in my opinion), on the firmer side, can be adjusted by heating the inserts. I printed it in PLA+, and I am pleased with it :) Hope it helps you. Cheers! :)
I was looking to make a soldering station for my new TS80P Iron. I found awl13A's holder and it does an extremely good job of holding the iron so I modified its base to fit my station. The holder swivels and has a hole for a 3mm locking…
I've printed it with pegs down, and pegs up — they both work great, but I'd recommend pegs down so that the visible surface when mounted is ‘pretty’ without the bridging visible.
Print with the usb-c cut out at the bottom/print plate.
Glue required. Also some magnets to better hold cover, but not 100% needed.
I love my TS80P soldering iron and my IKEA SKADI pegboard! This print holds a TS80P, two spare tips and a Solder Pig. If you enjoy the things I produce, buy me a coffee . Print settings 0.2 mm layer height 15% infill 4 walls no supports…
Storage box for the TS80P soldering iron with 3 or 4 tips, cable and power suply. As improvements, this can be printed separated and assembled with an M3 screw as hinge.
Just updated name to TS80P as the original says TS80 which triggers my OCD ;). All credits to the original poster.
Added a different charger and removed the grounding cable, so there could be a small apartment instead.
Since none of the Omnifixo cases on printables seems to fit the TS80P soldering iron, I designed one. It would probably also work for the Pinecil, TS80, or TS100 soldering irons, but I haven't tested it. Otherwise it also holds the power…
Needed a case that I can keep in a different place than my work area. It is bulky so will not fit into a backpack, unless it is large. However, does keep everything together. This will hold the USB adapter, flux and wick, solder tubes and…
A custom case for the TS80 soldering iron and two tips.
Soldering station for Baseus 65W charger and USB C powered soldering iron. Prints with no support Holder uses 608 bearing, M3 Nut and Bolt. (Would suggest 6900 bearing for TS80). M3 nut and screw Print vertically (as shown in the picture)
Parts required - 608z metal bearings x 2 10mm x 40mm strip of breadboard/copper clad board x 2 12V to 9V 3A DC/DC duck converter (should be actually rated for an input between 11 and 22 volts, I used this one -…
The lid takes nearly 3 hours to print. It prints with no suports and defualt settings 20% infill you know the drill. This intergrated solder dispencer was desighned to solve the problem that i carry far to much stuff in my ltt workshop…
keep all the ts80p soldering things organized!
Compact Case for Miniware TS80P soldering iron with 2 tip slots. Use 1.75mm filament as the hinge pin.
Made another solder iron holder - small and petite for this great TS80P. Holds metal spoon cleaner and solder tin spool holder with guide because i always loose my spools !! :-)
Prints in 2 parts and needs 2x m3x25mm screws for the hinges.
You will need to print 2 of these. If you are only printing 1 at a time, make sure to up the part cooling for the last point as it will go gloopy otherwise. I glued these to the case but if someone can make a better one I'd love to see…
4x.5 bin for ts80p soldering iron, 3u tall, non stacking Easily get the iron out by pushing down on the tip.
This is a remix of sarf2k4 https://www.thingiverse.com/thing:3300590 big box with the divider modified to allow clearance for the larger diameter of the TS80P. I included all the files for the big box. My Meshmixer file is available at…
I was looking for a small footprint soldering iron holder for the TS80P, and most other options seemed unstable or needed additional parts. I found this version to have the most satisfying fit for the iron, but I wanted to make the whole…
Synopsis This case is designed to be the most efficent way to carry your soldering iron encapuslating all the key features it is a case a way to carry and dispence your solder and a soldering iron stand it fitts perfectly in to the large…
Inserto per supporto saldatore standard per saldatore portatile TS80P. Il saldatore portatile USB-C TS80/TS80P ha un profilo molto sottile e non si adatta ai supporti standard che prevedono un diametro più grande. Questo inserto consente…
This is an adapter for the generic holder I bought on amazon. I printed with a stiff tpu filament. No clue how it would work with a ts80 non P iron, buts it also fits a Hakko iron, but not as good. This was the holder I had bought from…
Disclaimer - This is a proof of concept digital design only. This digital design is for learning purposes only. This digital design is not for production. Primarily based on the excellent TS100 case by Oleg Vint (Olvin)…
