Pi1541 level converter case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The case for the level converter allows you to build the simplest version of PI1541.
The converter is mounted on the cable and allows you to connect the C64 to Raspberry Pi with the proper software.
The case is screwed, you need screews 4x M3 with length beetwen 10 and 12 total and 4x nuts.
The nuts should be placed in the bottom part of case, using the pause function in the slicer. Be sure, duringe the pause you will have access to the holes. It is necessary to check whether the nuts is hidden in the hole completly and whether the axe of tap is vertical.
I printed the top pasrt upside down, using supports in the places where screw heads would go. This gives a clean surface under the heads. I removed the supports by inserting screws from other side.