Prusa CORE One Nozzle Wiper - Elegoo Wiper
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Prusa Core One wiper arm design to fit the Elegoo Nozzle Wiper brush.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 10
- Makes
- 0
- Views
- 422
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- GNU General Public License v3.0
Adapted Core One wiper design to fit the Elegoo Nozzle Wiper design.
I printed it with black PETG, PLA is probably not a good life long solution but can also work.
Left side:
Left side design is for M3x12, countersunk head screw, secured from underneath.
WARNING: USE AT YOUR OWN RISK! I tested the Wiper on my CORE one but, I cannot guarantee that it will work for you and will not damage your nozzle or printer.
Add the following code in the Printers tab settings under Custom G-Code, using the Expert Mode for PrusaSlicer.
;
; Nozzle Wiper Code
;
G0 X65 Y-12 Z2 F3000;
G0 X40 Y-13 Z1.5 F3000;
G0 X65 Y-14 Z1.5 F3000;
G0 X40 Y-15 Z1.5 F3000;
G0 X65 Y-16 Z1.5 F3000;
G0 X40 Y-17 Z1.5 F3000;
G0 X65 Y-18 Z1.5 F3000;
G0 X40 Y-19 Z1.5 F3000;
G0 X65 Y-19 Z1.5 F3000;
G0 X40 Y-18 Z1.5 F3000;
G0 X65 Y-17 Z1.5 F3000;
G0 X40 Y-16 Z1.5 F3000;
G0 X65 Y-15 Z1.5 F3000;
G0 X40 Y-14 Z1.5 F3000;
G0 X40 Y-13 Z1.5 F3000;
G0 X65 Y-12 Z2 F3000;To be inserted after this line of code:
G29 P9 X208 Y-2.5 W32 H4
Right side:
Right side design is for M3 nut to be inset from above, secured by a M3x12 screw from below.
Please adapt the code for the right hand wiper.