Prusa CORE One Nozzle Wiper - Elegoo Wiper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Prusa Core One wiper arm design to fit the Elegoo Nozzle Wiper brush.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 422
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Adapted Core One wiper design to fit the Elegoo Nozzle Wiper design.
I printed it with black PETG, PLA is probably not a good life long solution but can also work.
Left side:
Left side design is for M3x12, countersunk head screw, secured from underneath.
WARNING: USE AT YOUR OWN RISK! I tested the Wiper on my CORE one but, I cannot guarantee that it will work for you and will not damage your nozzle or printer.
Add the following code in the Printers tab settings under Custom G-Code, using the Expert Mode for PrusaSlicer.
;
; Nozzle Wiper Code
;
G0 X65 Y-12 Z2 F3000;
G0 X40 Y-13 Z1.5 F3000;
G0 X65 Y-14 Z1.5 F3000;
G0 X40 Y-15 Z1.5 F3000;
G0 X65 Y-16 Z1.5 F3000;
G0 X40 Y-17 Z1.5 F3000;
G0 X65 Y-18 Z1.5 F3000;
G0 X40 Y-19 Z1.5 F3000;
G0 X65 Y-19 Z1.5 F3000;
G0 X40 Y-18 Z1.5 F3000;
G0 X65 Y-17 Z1.5 F3000;
G0 X40 Y-16 Z1.5 F3000;
G0 X65 Y-15 Z1.5 F3000;
G0 X40 Y-14 Z1.5 F3000;
G0 X40 Y-13 Z1.5 F3000;
G0 X65 Y-12 Z2 F3000;To be inserted after this line of code:
G29 P9 X208 Y-2.5 W32 H4
Right side:
Right side design is for M3 nut to be inset from above, secured by a M3x12 screw from below.
Please adapt the code for the right hand wiper.