Clicks Keyboard Case iPhone 13 Pro
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Clicks Keyboard for an iPhone 13 Pro
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 21
- Makes
- 0
- Views
- 403
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Merged an iPhone 13 Pro case with the clicks keyboard case in Prusa slicer and sliced off the extra bits. Printed it with PLA back side down and keyboard up with supports (overhand threshold = 1), infill 50% 0.15 quality.
WIP screw threads, bottom connector, backplate and front keypad need to be tweaked
Installed the phone first, then the clicks keypad, PCB, backplate, etc.
Merged an iPhone 13 Pro case with the clicks keyboard case in Prusa slicer and sliced off the extra bits. Printed it with PLA back side down and keyboard up with supports (overhand threshold = 1), infill 50% 0.15 quality.
Installed the phone first, then the clicks keypad, PCB, backplate, etc.
Merged an iPhone 13 Pro case with the clicks keyboard case in Prusa slicer and sliced off the extra bits. Printed it with PLA back side down and keyboard up with supports (overhand threshold = 1), infill 50% 0.15 quality.
WIP screw threads, bottom connector, backplate and front keypad need to be tweaked
Installed the phone first, then the clicks keypad, PCB, backplate, etc.
Merged an iPhone 13 Pro case with the clicks keyboard case in Prusa slicer and sliced off the extra bits. Printed it with PLA back side down and keyboard up with supports (overhand threshold = 1), infill 50% 0.15 quality.
Installed the phone first, then the clicks keypad, PCB, backplate, etc.