Clicks Keyboard Case iPhone 13 Pro
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clicks Keyboard for an iPhone 13 Pro
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 403
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Merged an iPhone 13 Pro case with the clicks keyboard case in Prusa slicer and sliced off the extra bits. Printed it with PLA back side down and keyboard up with supports (overhand threshold = 1), infill 50% 0.15 quality.
WIP screw threads, bottom connector, backplate and front keypad need to be tweaked
Installed the phone first, then the clicks keypad, PCB, backplate, etc.
Merged an iPhone 13 Pro case with the clicks keyboard case in Prusa slicer and sliced off the extra bits. Printed it with PLA back side down and keyboard up with supports (overhand threshold = 1), infill 50% 0.15 quality.
Installed the phone first, then the clicks keypad, PCB, backplate, etc.
Merged an iPhone 13 Pro case with the clicks keyboard case in Prusa slicer and sliced off the extra bits. Printed it with PLA back side down and keyboard up with supports (overhand threshold = 1), infill 50% 0.15 quality.
WIP screw threads, bottom connector, backplate and front keypad need to be tweaked
Installed the phone first, then the clicks keypad, PCB, backplate, etc.
Merged an iPhone 13 Pro case with the clicks keyboard case in Prusa slicer and sliced off the extra bits. Printed it with PLA back side down and keyboard up with supports (overhand threshold = 1), infill 50% 0.15 quality.
Installed the phone first, then the clicks keypad, PCB, backplate, etc.