Wyniki wyszukiwania: clicks

Clicks Communicator 3D Model

a rough mockup of the Clicks Communicator smartphone.

Barco Clickshare Wall Mounted Button Holder

I printed with PLA 20% infill. No Supports Printed standing up There's three models: One button, Two buttons, and one for Three buttons.

ClickShift - The shifter-like joystick fidget

The ClickShift is an experimental new fidget design, combining a ball-joint joystick and ball detent mechanism to make a joystick that snaps into multiple positions. The result is a “clicky” joystick that produces a fun tactile (and…

Barco Clickshare wall holder

Simple wall holder for Barco Clickshare Button/Dongle. Mount with double sided tape, but let me know if you need a version with hole(s) to mount with screw(s)

keyrambit, (no bearing needed, clicks together)

This is my version of keyrambit fun spinner for your carkey 100% 3Dprinted The spinring can be pushed in its place and will stick there These are two of my designs, DM for more intrest

Printable Mobius Strip - Clicks together

Inspired by Teaching Tech's bendable prints, I created this mobius strip. The dimensions are not from his design, so it's actually completely made by me. There is a clip at each end, so after printing you can bend and click the strip…

Clicks Hooks

Use tips: There are 2 models of hooks, left direction and right direction. By combining these hooks you can obtain various useful shapes. They are not only used for hooks, achieving more complex shapes, you can achieve, for example, a…

Clickshare button caddy

Designed to hold single or multiple Barco Clickshare buttons. 1 version designed to be wall mounted and also hold a TV remote

Fidget Switch with 3 clicks

A minor update to safpep's original fidget switch with 3 clicks instead of two. The design isn't the neatest but it gets the job done. The new notch should be pointing upwards (if you're not getting three clicks, flip it around)

Fidget RotaryClickSpinner

Fidget RotaryClickSpinner Spinner with two magnetized rotary knobs and a very satisfying ratchet mechanism. External Hardware: 1x countersunk screw M2.5x12mm 1x countersunk screw M2.5x20mm 2x M2.5 x 4mm brass heatinsert 2x 608 bearing 14x…

Impossible Dovetail Joint Cube (IDJC) inspired by "Clickspring"

Two days ago i watched a video of the "Impossible Dovetail" on the "Clickspring" channel on YT. For ambitious woodworkers this is a very common project, but Chris machined the parts out of aluminium (aluminum for U.S.) and brass. I really…

Clicks-ish Case (with chin!) for Unihertz Titan 2 Elite

Update: Mk2.5 revision has been uploaded. Raised hexagon design for better grip, deeper, wider opening for magsafe ring fitment and magnetization, .5mm raised lip. and a side orientation for improved printing. Update: Mk2 revision is…

Gravitrax Double Drop Track - Clicks Together - Quick Print

Gravitrax Tracks Double Drop 0.4n 0.12mm PLA Prusa MK4S 13 Minutes Layer Height: 0.12mm Walls: 3

ClickShareBuddy 3 Parts

This is a remix from https://www.thingiverse.com/thing:2116015 . I just made it a bit higher for 3 instead of 2 Clickshare buttons. Update New Version, I made it a bit wider, because the first one was too close... Print Settings Printer:…

Support ClickShare (remix avec trous de vis)

Juste un remix avec 2 trous pour vis fraisées de diamètre 4, et un socle plus épais pour intégrer la fraisure des têtes

Clicks Keyboard Case (Founders Edition)

This is a case enclosure for the clicks keyboard phone case. This was modelled from a iPhone 14 pro founders edition. Merge this model with a phone case in the prusa slicer and to get a full phone case working with the clicks keyboard. Be…

Gravitrax Triple Drop Track - Clicks Together - Quick Print

Clicksheet Belt

Clicksheet belt is a printable belt. Clicksheet can be attached to any click sheet so you could click and attach. it is 0.4mm wide meaning it was designed for a one pass print. no support is needed

Clicks Communicator remix

A rough model of the Clicks Communicator smartphone, with a minor change to make it easier to print. Can also support manual 2 color printing, if you want.

BNC connector dust cap that clicks into place and stays there

I looked at several BNC dust caps on Printables. I wanted a cap that would click into position and not rattle off. I didn't find any (maybe I missed one). So I designed my own. After lots of trial and error, here it is. There are internal…

Modified Clicks to fit Mousewheel

modified clicks to fit ground down original g305 mousewheel. Support for button side of the mousewheel is needed.

BNC connector dust cap that clicks into place - with knurling

Remix o cjnaz's "BNC connector dust cap that clicks into place and stays there". I just added a knurling for a better grip with https://bumpmesh.com , here were my settings: height=0.3 inverted scale=0.33

Corner LED - Clicks Together

This Corner LED is a very simple design that prints pretty quickly. I printed it on a Bambu X1 but if you have a smaller build plate then I would scale down all the parts equally to fit. On the Bambu, I had to print them at an angle flat.…

Clickshare Wall mount

Wallmount for your ClickShare dongle

Barco ClickShare Wall Mount

Simple wall mount for ClickShare buttons/dongles, holds 2 pieces. Schlichte Wandhalterung für ClickShare Dongel mit Platz für 2 Stück.

Quad clicks

4 satisfying clicks Add the cherry-compatible key switch of your choice, a key cap, and a lanyard. Then you'll be clack

Clicks Keyboard Case... Case for iPhone 14 Pro v1.0

This case is intended to fit over the Clicks Creator Keyboard for iPhone 14 Pro, which can be purchased here: https://www.clicks.tech/ This may fit the 15 Pro model as well, but not the Max models. This shell was made primarily because I…

Clicks Keyboard Case iPhone 13 Pro

Merged an iPhone 13 Pro case with the clicks keyboard case in Prusa slicer and sliced off the extra bits. Printed it with PLA back side down and keyboard up with supports (overhand threshold = 1), infill 50% 0.15 quality. WIP screw…

Clicks Keyboard Case CASE for iPhone 15 Pro Max

I made this remix out of need. I found myself disliking how much my Clicks Keyboard case would chip with even the lightest of use. I found a version of a case for the iPhone 14 version and scaled it up to fit my iPhone 15 Pro Max version.…

Clickshare dongle caddy with magnetic connection

i printed this caddy for our office: https://www.printables.com/de/model/106472-clickshare-button-caddy but a colleague needed a caddy for more dongles so i designed this one holds up to 4x2 click share units instructions: make a pause at…

Fujifilm GFX100RF filter holder - clicks on the hood holder

Print settings Nozzle size ......................... 0.4 mm Layer height ....................... 0.1 Number of perimeters ... 2 Infill ...................................... 15% Supports ............................. yes, the inner…

Clickster

This is a fun bike accessory that turns a standard trading card or 3d printed card into a spoke sounder. The card hits the spokes to make a motorcycle-style buzzing sound or a softer Kalimba-like tone depending on the cards flex. The…

ClickSecure Cable Holder

Revolutionize Your Space with the ClickSecure Cable Holder Discover the ultimate solution to cable management with the ClickSecure Cable Holder, meticulously designed for durability and ease of use. Crafted from high-quality PETG, this…

Barry The Worm Hinge Fidget with clicks

Barry is a worm i made him because idk actually but he is a worm and you will make your own. no escape from Barry...

Sekey handle clicks into place

On my handcart, the locking mechanism had worn out over time, meaning you could no longer lock the handle at the different lengths. So I recreated it and improved it slightly. Please print it exactly as shown in the slicer image so that…

Chandelier hanging cage for the LG FAS163F speaker – swivel hanger, aims in 15° clicks

Chandelier hanging cage for the LG FAS163F speaker – swivel hanger, aims in 15° clicks Summary Hang an LG FAS163F speaker from one ceiling hook: a printed cage plus a wrought-iron-style chandelier hanger that turns in 15° clicks to aim…

Tablet and Phone Holder for the Round 16 mm Kitchen Rail (Fits IKEA HULTARP) – Clicks On From the Front

RailRest is a one-piece cradle that hangs a cased tablet (landscape) or a phone on a round 16 mm kitchen rail - the size of IKEA HULTARP - so a recipe stays at eye level and off the counter. It clicks onto the rail from the front , swings…

Clicks Communicator remix

A rough model of the Clicks Communicator smartphone, with a minor change to make it easier to print. Can also support manual 2 color printing, if you want.

Quad clicks

4 satisfying clicks Add the cherry-compatible key switch of your choice, a key cap, and a lanyard. Then you'll be clack

Gravitrax Double Drop Track - Clicks Together - Quick Print

Gravitrax Tracks Double Drop 0.4n 0.12mm PLA Prusa MK4S 13 Minutes Layer Height: 0.12mm Walls: 3

Gravitrax Triple Drop Track - Clicks Together - Quick Print

Impossible Dovetail Joint Cube (IDJC) inspired by "Clickspring"

Two days ago i watched a video of the "Impossible Dovetail" on the "Clickspring" channel on YT. For ambitious woodworkers this is a very common project, but Chris machined the parts out of aluminium (aluminum for U.S.) and brass. I really…