Clicks Keyboard Case... Case for iPhone 14 Pro v1.0
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an additional shell for the Clicks Keyboard Case for the iPhone 14 Pro.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 661
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- GNU General Public License v3.0
This case is intended to fit over the Clicks Creator Keyboard for iPhone 14 Pro, which can be purchased here: https://www.clicks.tech/
This may fit the 15 Pro model as well, but not the Max models.
This shell was made primarily because I disliked the soft touch texture of this keyboard, with the additional benefit of adding a bit more protection.
There is a version with the cutout for a Snap 4 Luxe grip, which also enables magnetic wireless charging with this case: https://ohsnap.com/products/snap-4-luxe If you don't want to use this grip, please print the standard version with no cutout.
Printed on a Bambu P1S using red ABS, but anything should work fine.
My settings for the ABS print:
Infill: Gyroid 15%
Wall loops: 3
Top/Bottom Shell Layers: 3
Support: Yes, Normal(auto), everywhere
Brim: None
Nozzle Temp: 270C
Bed Temp: 100C - Preheat for a few minutes to prevent warping.
Print the model on its back, with the walls facing upwards.
Future additions: I may add some texturing to the bottom half of the case to improve feel and grip further.