Clicks Keyboard Case... Case for iPhone 14 Pro v1.0
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an additional shell for the Clicks Keyboard Case for the iPhone 14 Pro.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 21
- Makes
- 0
- Views
- 660
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- GNU General Public License v3.0
This case is intended to fit over the Clicks Creator Keyboard for iPhone 14 Pro, which can be purchased here: https://www.clicks.tech/
This may fit the 15 Pro model as well, but not the Max models.
This shell was made primarily because I disliked the soft touch texture of this keyboard, with the additional benefit of adding a bit more protection.
There is a version with the cutout for a Snap 4 Luxe grip, which also enables magnetic wireless charging with this case: https://ohsnap.com/products/snap-4-luxe If you don't want to use this grip, please print the standard version with no cutout.
Printed on a Bambu P1S using red ABS, but anything should work fine.
My settings for the ABS print:
Infill: Gyroid 15%
Wall loops: 3
Top/Bottom Shell Layers: 3
Support: Yes, Normal(auto), everywhere
Brim: None
Nozzle Temp: 270C
Bed Temp: 100C - Preheat for a few minutes to prevent warping.
Print the model on its back, with the walls facing upwards.
Future additions: I may add some texturing to the bottom half of the case to improve feel and grip further.