1 / 1
Resvent CPAP Mask Clip – Replacement Part
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement clip for Resvent CPAP masks. Designed to restore functionality when the original clip breaks.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 29
- Makes
- 0
- Views
- 74
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Medical Tools
- License
- Creative Commons — Attribution
This is a 3D-printed replacement clip for Resvent CPAP masks, created after my original clip broke. Instead of replacing the entire mask, this part allows you to continue using your equipment without interruption.
⚙ Details:
- Fits: Resvent CPAP mask clip connection
- Purpose: Replacement for the original clip that often breaks with repeated use
- Material tested: PETG (chosen for strength and slight flexibility)
🖨 Print Settings (tested):
- Layer height: 0.12–0.20 mm (0.12 mm recommended for best fit and finish)
- Perimeters/walls: 3–4
- Infill: 100%
- Supports: Required (everywhere, to ensure clean overhangs and clip detail)
- Print orientation: Flat on the bed with clip arms facing upward for maximum strength
- Material: PETG (ABS or Nylon may also be suitable if you need higher flexibility)
- Nozzle: 0.4 mm standard
- Bed adhesion: Brim recommended for stability
⚠ Note: This part is intended as a replacement convenience for personal use. It is not an official Resvent spare part and should be used at your own discretion.