Jayco hub cap centre
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A cover for the centre of a Jayco caravan wheel
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 51
- Makes
- 0
- Views
- 212
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
For my friend's Jayco caravan, where one of the caps was missing that protects the axle grease from dust.
For a wheel with six wheel nuts, where this hubcap is held on by three M6(?) bolts. The diameters of the holes for these are in the scad file, and can be adjusted if needed.
Fits well, but you may need longer bolts to hold it on, and my guess was a bit more generous than the original, for the diameter of the cut-out for the wheel nuts, but it's all parametric so you can adjust as needed.
5mm thickness all around, but the end plate could go thinner if you have and can re-use the bolts.
The image is after my friend added a logo; the STL here does not have one, but I admit it improves the design.