Eve Motionblinds 38mm tube adaptors
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Eliminate clunking noises from your Eve Motionblinds motor housed in 38mm tubes.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 21
- Makes
- 0
- Views
- 181
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
I have several blinds around the house that use the Eve Motionblinds upgrade motor. My issue is that for the 38mm tube, especially the single slot version, positioning the motor centrally in the tube can be hit and miss.
The motor itself is self-centering at the driven-end, but relies on the use of supplied spacers to centre the fixed-end of the motor in the roller blind tube. As these spacers are not perfectly circular it can lead to the blind motor running off centre or worse still jiggling about in the tube. Even a slight bit of movement can generate clunking noises as the blind operates.
My solution is to remove the use of spacers altogether by replacing the motors' fixed-end plastic bearing with an adaptor designed to fit 38mm tubes perfectly, doing this has eliminated all my problems!
The photos show the three variants of 38mm tube (single slot, dual slot and dual slot with spikes) that my adaptor models will work with.
The models included here are for the single and double slot 38mm tube types only.
Fitting:
Print the adaptor suited to your tube (I used PETG, no supports, 15% infil).
Remove the single screw (and small washer) that holds the driven-end on, there is a fair bit of play by design in case you think the screw was already loose. Note: In earlier motors this is a Phillips screw in others it is hex head bolt needing a small allen key.
Slide the old grey fixed-end bearing up and off the motor and replace it with your new adaptor.
Refit the driven-end, don't overtighten the small screw/bolt - there is always a bit of play here.
Slide the whole thing into your roller blind tube and you are good to go.
Good luck.