16g Begleri Bead for 550 Paracord
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3d printable begleri skill toy beads that are large enough for good weight, quick print
- Rating
- 0 / 5
- Likes
- 21
- Downloads
- 60
- Makes
- 0
- Views
- 435
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial
PLEASE CHECK OUT THE V2 HERE: Begleri Bead V2 - for 550 Paracord by Eligh Small | Download free STL model | Printables.com
This is a model for a begleri bead that does not require hex nuts, it is a bit on the larger side but when printed at high density (90% +) it gives good weight for the toy.
Paracord requires a simple overhand knot and then it can be pulled into the cavity so you do not see it.
I recommend printing out of PLA or PETG, ABS and ASA are much lower density and wont give as much weight.
TPU would also work and is a similar density to PLA, this would make them less loud when they bang together
This took me 1 hour to print 2 beads on my Bambu labs p1s at 97% density and a 0.28mm layer height so it is a relatively quick print and came out at around 16g each.
The fit on the hole is a little tight for the paracord I had, but it is easily pushed through with an Allen key or something similar.
PRINT SETTINGS:
0.2 or 0.28mm layer height, detail is minimally affected so dealers choice
90% or higher infill for good weight
no supports or brim should be required
