78mm Mirror Gauge for German Motorbikes (Spiegelschablone für Biker)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
78mm Mirror Gauge for German Motorbikes (Spiegelschablone für Biker)
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 11
- Makes
- 0
- Views
- 121
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a 78mm measuring gauge for motorbike mirrors used in GERMANY.
The law in Germany says that all motorbike mirrors may have a minimum surface of 69cm². This is easy to measure if it is a ROUND mirror because it means that your round mirror needs to have a minimum diameter of 9,37cm = 69cm²..
For all NON-ROUND mirrors the law says that you have to able to place a 78mm round pattern on the mirrors surface without cutting any edge.
At this point you can use this gauge with a diameter of 78mm. If you can FULLY place it ANYWHERE on your mirrors surface you are good to go in Germany. Else your mirrors are too small and will cause a fine of at least 50€ and maybe forbidden riding because your bike is not safe.
The same penalty may follow if your mirrors don't have a registered KBA number which stands for “Kraftfahrtbundesamt” (engl. Federal Office for Motor Verhicles). Mirrors without a KBA number are only for Private and show use but not in German traffic. So be careful.
Have fun - drive safe!
Material: PLA
Layerheight: 0.2mm
Infill: 15%
Disclaimer: All facts may be subject to possible amendments and faults. Make sure you meet all requirements of the country you drive in or even cross.