Single Insulin Pen Box
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€3.09 – €3.78 net (excluding VAT)
For file: Single Pen Box_0.4n_0.15mm_PETG_MK3.9_2h59m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.43 excluding VAT (range midpoint).
- Weight reported by the author
- 56 g
- Print time reported by the author
- 2.99 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Sometimes I don't feel like carrying a ton of extra items, so I just put a capped needle on my insulin pen and go!
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 37
- Makes
- 0
- Views
- 456
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Medical Tools
- License
- Creative Commons — Attribution — Noncommercial
Some days you don't want to carry everything in your kit, or you need just a pen and needle to toss in your backpack for a hike or class. This case allows you to safely carry your insulin pen with a capped needle and helps protect the pen and keep the cap in place. I tend to be bad about using alcohol wipes every injection, but you can wrap one around your pen if you're a better diabetic than I am :)
Printed in PETG for durability, this box closes with six 6 mm x 3 mm magnets. Due to the Boolean/ negative errors, this model cannot be fully exported with the negatives, so you do have the option to change magnet sizes or shapes as needed. There is even a little thumb latch to mark the top and bottom.
THE HINGE IS NOT PRINTED IN PLACE. You will need to use 3 small pieces of filament to complete the hinge. See the filament hinge tutorial at https://www.printables.com/model/450954-filament-hinge-tutorial by @SteveS42's detailed description on how to finish this hinge.
This will fit a pen with an attached needle up to 6.5" x 0.5" (170 mm x 15 mm).