MINKY | Desktop bin
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Meet MINKY, a minke-whale-inspired desktop bin with a minimalist swing lid.
- Rating
- 0 / 5
- Likes
- 16
- Makes
- 0
- Views
- 303
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Standard Digital File License
MINKY | Desktop bin
Meet MINKY, a stylish desktop bin with a minimalist swing lid.
The shape and pattern are inspired by a minke whale soaring vertically out of the water, showing its ventral pleats.
Count 2h of print time with a 0.8mm nozzle.
And a bit less than 6h with a 0.4mm nozzle.
Happy printing!
DIMENSIONS | Ø121mm x H179mm
3D PRINT SETTINGS:
All STL files are already oriented properly.
No supports, no adhesion brim needed.
BIN:
Go with regular settings.
Align the seams towards the back to make them more discrete.
And you can save a little bit or print time by setting the top and bottom layer patterns to "concentric".
I printed the light green one with a 0.4mm nozzle, and the red one with a 0.8mm nozzle.
LID:
Print with regular settings, no particular tricks there.
As with the bin, I also set the top and bottom layer pattern to "concentric", but it's not absolutely necessary.