MINKY | Desktop bin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Meet MINKY, a minke-whale-inspired desktop bin with a minimalist swing lid.
- Ocena
- 0 / 5
- Polubienia
- 16
- Wydruki
- 0
- Wyświetlenia
- 305
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Standard Digital File License
MINKY | Desktop bin
Meet MINKY, a stylish desktop bin with a minimalist swing lid.
The shape and pattern are inspired by a minke whale soaring vertically out of the water, showing its ventral pleats.
Count 2h of print time with a 0.8mm nozzle.
And a bit less than 6h with a 0.4mm nozzle.
Happy printing!
DIMENSIONS | Ø121mm x H179mm
3D PRINT SETTINGS:
All STL files are already oriented properly.
No supports, no adhesion brim needed.
BIN:
Go with regular settings.
Align the seams towards the back to make them more discrete.
And you can save a little bit or print time by setting the top and bottom layer patterns to "concentric".
I printed the light green one with a 0.4mm nozzle, and the red one with a 0.8mm nozzle.
LID:
Print with regular settings, no particular tricks there.
As with the bin, I also set the top and bottom layer pattern to "concentric", but it's not absolutely necessary.