20A 300W Buck converter DIN rail mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
35mm DIN mount for this 20A 300W buck converter that I use for 12v fans and LED strip. The mount should be seated on a…
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 82
- Makes
- 0
- Views
- 707
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
35mm DIN mount for this 20A 300W buck converter that I use for 12v fans and LED strip. The mount should be seated on a Voron DIN clip (also available in this thing).
I've included two mounts, one that orients the bucker converter along the DIN rail (parallel) and another across (perpendicular). I mounted these to the DIN clip using M2.6x6 self tapping screws (sourced from Amazon).
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2
Infill:
30%
Filament: Any PLA / PETG / ABS Any
Notes:
I printed the mount in PLA but the DIN clip should always be printed in ABS or PETG.
PLA is 50% stiffer than PETG/ABS and the push fit spring will not flex sufficiently, making install on the DIN rail difficult / not possible.Category: Electronics