20A 300W Buck converter DIN rail mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
35mm DIN mount for this 20A 300W buck converter that I use for 12v fans and LED strip. The mount should be seated on a…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 82
- Wydruki
- 0
- Wyświetlenia
- 707
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
35mm DIN mount for this 20A 300W buck converter that I use for 12v fans and LED strip. The mount should be seated on a Voron DIN clip (also available in this thing).
I've included two mounts, one that orients the bucker converter along the DIN rail (parallel) and another across (perpendicular). I mounted these to the DIN clip using M2.6x6 self tapping screws (sourced from Amazon).
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2
Infill:
30%
Filament: Any PLA / PETG / ABS Any
Notes:
I printed the mount in PLA but the DIN clip should always be printed in ABS or PETG.
PLA is 50% stiffer than PETG/ABS and the push fit spring will not flex sufficiently, making install on the DIN rail difficult / not possible.Category: Electronics