IKEA JANSJÖ Lamp Clamp Replacement (New Version)

Replacement clamp for IKEA JANSJÖ clamp lamp.

This is a fresh model for the newer version without suction cups and with broader clamp jaws.

Materials

Next to the printed parts, you will need the following:

• [1×] Spring, salvaged from the original clamp
• [1×] Screw M3, 30 mm (axle)
• [1×] Nut M3, self-locking (axle)
• [2×] Screw M3, 5 mm (cable clip)
• [1×] Switch, either salvaged or a new one*

*) If you have a snap-in switch handy, you can use my Cable Switch model.

Note: The thread on the lamp arm seems to be non-standard. I have added a printable nut which works well.

If you like this design, please consider leaving a ♥heart. Thanks!

----------

Note: I suggest to use a stronger material like PETG with a higher layer adhesion than PLA!