Add-on shelf brackets
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Add-on shelf brackets for expanding storage with 1x6 boards. Made to add room for my wife's brooches.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 7
- Makes
- 0
- Views
- 33
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
My wife's brooch cabinet was full so I made up some brackets to add-on shelves as she needs space.
These brackets allow the addition of a 1x6 board cut to the length of the current shelf.
These aren't really ‘free standing’ hence the thin foot profile. I made them with the idea of adding a shelf that's constrained by the current width of the space without reducing the space underneath.
We are using them for expanding a brooch collection, so I won't comment on the weight capacity.
I made two models:
- The first includes a fillet / curved underside for support, but my printer couldn't quite nail the smooth curve and kept coming out with what i call ‘neck beard’. It's very functional and your mileage may vary with a more calibrated printer.
- The second model replaces the fillet with supports on the sides and I even added 2 screw holes for more secure attachment if needed.
PRINTER SETTINGS
0.4 mm nozzle
I printed at 0.12 / 0.16 initial (w/ or w/o variable layer height)
3 walls
Anything weird, hmu, I have a walnut brain.