Add-on shelf brackets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Add-on shelf brackets for expanding storage with 1x6 boards. Made to add room for my wife's brooches.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 33
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
My wife's brooch cabinet was full so I made up some brackets to add-on shelves as she needs space.
These brackets allow the addition of a 1x6 board cut to the length of the current shelf.
These aren't really ‘free standing’ hence the thin foot profile. I made them with the idea of adding a shelf that's constrained by the current width of the space without reducing the space underneath.
We are using them for expanding a brooch collection, so I won't comment on the weight capacity.
I made two models:
- The first includes a fillet / curved underside for support, but my printer couldn't quite nail the smooth curve and kept coming out with what i call ‘neck beard’. It's very functional and your mileage may vary with a more calibrated printer.
- The second model replaces the fillet with supports on the sides and I even added 2 screw holes for more secure attachment if needed.
PRINTER SETTINGS
0.4 mm nozzle
I printed at 0.12 / 0.16 initial (w/ or w/o variable layer height)
3 walls
Anything weird, hmu, I have a walnut brain.