Creality SpacePi Space Pi X4 Compact Spool Auto-Rewinder Mod
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an Auto-Rewinder that uses a metal spring and is compatible with the Creality SpacePi X4.
- Rating
- 3 / 5
- Likes
- 68
- Downloads
- 215
- Makes
- 0
- Views
- 3,195
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- GNU General Public License v2.0
BOM（I didn't actually buy these items）
- M3x10 Flat head screws(Within 15 mm) x16 https://s.click.aliexpress.com/e/_olr2kJl
- 608z bearings x16 https://s.click.aliexpress.com/e/_oCpbWDp
- badge reel x4 https://s.click.aliexpress.com/e/_oFCAgZp
- Option EVA Foam sheet Thick 1mm https://s.click.aliexpress.com/e/_oBV1GgJ
Please refer to the following for detailed instructions on how to make it.
https://www.printables.com/model/678300-compact-spool-auto-rewinder
Print Settings
ABS(Created with eSun ABS HS)
Settings: 0.2mm layer height, 0.4mm nozzle, 4 walls, 4 top and bottom layers, min 30% infill.
Notes
Please refer to the original data for assembly instructions.
https://www.printables.com/model/678300-compact-spool-auto-rewinder
Before using the clutch, please make sure it is functioning properly. Make sure it is set up so that it spins freely, especially when rotating in reverse.
If the rollers on the SpacePi X4 are difficult to remove, try hooking a reusable tie wrap or similar item near the bearing and pulling it out.
If the filament spool is slipping, attach 1mm EVA foam with double-sided tape.