Tapo C52A Camera Mount
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.37 – €1.67 net (excluding VAT)
For file: 20250829_C52A-Halter_V2_0.4n_0.2mm_PETG_MK4S_1h22m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.52 excluding VAT (range midpoint).
- Weight reported by the author
- 24 g
- Print time reported by the author
- 1.36 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Platzsparender Kamera Halter / Space-saving camera holder
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 32
- Makes
- 0
- Views
- 126
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Ich habe mit die Tapo C52A mit Farbnachtsicht zur Überwachung meines Druckers zugelegt. Jedoch hat mit die Originale Halterung nicht gefallen, da diese zu viel Platz in Anspruch nimmt.
Hier findet Ihr eine Halterung zur Überkopf Montage die deutlich Platzsparender ist als die originale Halterung.
Ich benutze den Halter in meinem Druckgehäuse, wo die Kamera an 3030 Aluprofilen befestigt ist. Die Anwendung ist aber auch überall anders denkbar.
Gedruckt in PETG ohne Stützmaterial.
Viel Spaß beim Drucken. Wenn Euch das Modell gefällt würde ich mich über ein like freuen.
I bought the Tapo C52A with color night vision to monitor my printer. However, I didn't like the original mount because it took up too much space.
Here you can find an overhead mount that is significantly more space-saving than the original mount.
I use the mount in my printer enclosure, where the camera is attached to 3030 aluminum extrusions. However, it can also be used anywhere else.
Printed in PETG without support material.
Have fun printing! If you like the model, I would be happy if you leave me a like
Diesen Halter nutze ich als Zubehör für mein Drucker Gehäuse / these part is used as an addon for my printer enclosure:
https://www.printables.com/model/1015190-drucker-gehause-printer-enclosure