1 / 7
Helinox Chair Two Cupholder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Cupholder for a Helinox Chair Two, probably works with other chairs too.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 24
- Makes
- 0
- Views
- 313
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Share Alike
A Cupholder for a Helinox Chair Two, probably works with other chairs too.
The holder-part (between the chairs legs) is available in two variants:
- The original one-piece design, sitting right above the junction. Maybe too low for some
- A three-part design with a center and two identical side pieces. The length (and therefore the height when mounted on the chair) can be adjusted by choosing suitable screws.
Additional parts needed:
- M6x50 screw
- 3 M6 nuts
- Ball bearing 626
- For the holder type 2: two M6 nuts and two M6 screws