Counting matching models…
I have designed these for easy to click on and off, moreover it makes it easier to clean after use. All feet is stored separately and can easily fit into the Helinox chair zero storage bag together with the chair. It is also possible to…
The feet on my Helinox chairs had perished, and rather than replace them with standard skinny versions and adding a ball foot adapter, I made these replacements to enjoy the best of both worlds. The Helinox ball foot adapter accessory is…
PETG or ABS/ASA for weather protection some strength profile with more walls (6) print upsidedown without support better to use brim
Fits: Chair One, Chair Two, Chair One XL, Sunset Chair, Beach Chair, Savanna Chair, Playa Chair, Chair One Mini, Chair Zero, Chair Zero L, and Chair Zero High-Back. Supports: Yes (everywhere) Infill: 30% The way this is uploaded, it will…
Replacment foot for helinox camping chair Print Settings Printer: Flash Forge Creator Pro Rafts: No Supports: No Resolution: .1 mm Infill: 100% Post-Printing Take a 1/2 in drill bit, i used an endmill in a drill,down the middle to clean…
If, like me, you are a little clumsy and, for whatever reason, pull too hard on the chair leg and end up breaking the plastic part, you will find a replacement part here to reassemble and use the chair. Fits the Helinox chairs with the…
A Cup and Phone Holder for Helinox - Beach Chair
Remix of the great model from Peter H with adapted dimensions to replace the original feet on the Helinox chairs with 17.4mm poles. In my case they are used on my Swivel chair , but according to Helinox's description they should also fit…
I love my Helinox Cot One Max, but felt it could use a little help keeping its base frame in check when packing it away. This clip should work with the Cot One Convertible, Cot One Convertible L, Cot One Convertible Insulated, Cot One Max…
Endcap for the Helinox Chair One. (Stronger than the original part). For the best strength, print the part in a horizontal orientation.
Helinox Chair One Feet Inner Diameter 14mm, Feet Diameter 30mm Material: PETG Walls: 4 perimeters Infill: 100% Pressfit feature I welcome all feedback! I'm eager to see your finished models. Happy printing!
A Cupholder for a Helinox Chair Two, probably works with other chairs too. The holder-part (between the chairs legs) is available in two variants: The original one-piece design, sitting right above the junction. Maybe too low for some A…
Helinox Chair Zero L Feet Adapter (Wider Tube Version) This version is specifically designed to fit the Helinox Chair Zero L feet, which are slightly wider than those used in the original model due to the tube and rubber foot dimensions.…
There are articles and stories all over the internet about cots damaging the floor of tents. Cots generally have hard plastic feet and can damage the floor of your tent if you're on rocks (like one finds in nature, especially on tent pads…
This model is a hook that fits into the pole mount of a Helinox Table One. I´ve printed it in Prusament Recycled PETG with 0.2mm layer height, no supports, 15% infill, and 2 perimeter layers (default PrusaSlicer Prusament PETG profile).…
after my last camping trip to norway i lost one of my helinox chair feet covers.. i printed it in tpu and 80 % infill and at 95% resizing printing so it will be tight around the leg For the people who have worn leg feet I put in an 4x gcode
flexible filament must be used eg TPU 95A 12 bottom layers for maximum strength 4 walls
This feet fully replace original feet of the chair. Print using flexible material, inner diameter is 0.1mm smaller that the pole for tight fit. I preffer to print 14 bottom shell layers for this one for optimal strength - the bottom is…
I used a heat gun to make the plastic slightly more flexible to get the elastic knot in.
Consider printing with higher infill and more layers/perimeters to handle the load. Example shown in image is printed standing like in cover photo in PETG with 0.2 layer height and brim. I also used a bit of support in the center of the…
I printed this model on Prusa MK3+. Filament: PETG Infill: 50% Layers: 4 Printed with hole down (to the heatbed). No support needed.
