Sawstop PCS Miter Slot Guide
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Miter slot guide rails for Sawstop PCS.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 52
- Makes
- 0
- Views
- 233
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
I created this for a crosscut sled on a Sawstop PCS. You can print as many extension pieces as needed for the length you want to achieve. They print without supports on structure .15 setting, I used PETG for strength.
One note, this is a tight fit so print one, or a section of one to test your saw before printing all supports. You will likey need some tweaking and light sanding of the joints for the best, smoothest operation. I suggest you use white or light colored filament so you can see where the rails rub during operation and sand those areas. I connected them with gel-type CA glue and it worked well.