Sram/Dofus - HueForge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An attempt to remake an iconic class of Dofus/Wakfu universe using HueForge.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 0
- Views
- 218
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x155.1mm in size
You may print at higher layer heights below the Base Thickness of 0.8mm
The Max allowed Thickness is 2.8mm and the Actual Thickness is 2.48mm
Filaments Used:
#ffffff PLA eSun Cold White Transmission Distance: 2.2
#0e206e PLA eSun Blue Transmission Distance: 1.9
#f7d7b7 PLA Elegoo Beige (MATTE) Transmission Distance: 2.1
#e28538 PLA Sunlu Orange Transmission Distance: 5
#3fd1e7 PLA eSun Light Blue Transmission Distance: 3.4
#534daf PLA Elegoo Purple Transmission Distance: 1.6
This print uses 6 unique filaments
Swap Instructions:
Start with Cold White
At layer #10 (0.88mm) swap to Blue
At layer #11 (0.96mm) swap to Beige (MATTE)
At layer #17 (1.44mm) swap to Orange
At layer #22 (1.84mm) swap to Blue
At layer #26 (2.16mm) swap to Light Blue
At layer #27 (2.24mm) swap to Purple for the rest.