Low Profile Hanging Hygrometer and Filament Holder Frame and Label Holder with PC4-M10 pass through for Cereal Box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Reduces the frame profile height by app. 15 mm. I also added a combined labelholder and filament pass trough element.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 16
- Makes
- 0
- Views
- 556
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This mod is based on the design by tcosta, which I really like and use every day with the filament spool hanging from the top inside the box. Essentially, it reduces the frame profile height by about 15 mm. Additionally I added a part to hold labels and allow the filament pass through. I imported the original fram to FreeCAD and redrew it to get the low profile.
Why would I want this low profile frame? I think it is helpful to have:
- decent-sized, replaceable labels on the box
- filament pass-through, hygrometer, and label all on the same front side
- the option to use my combined label holder and PC4-M10 pass-through plate
- the lower opening not too low, leaving clearance for future desiccant containers
- the top pass-through hole positioned high to minimize filament bending
Please note: If you want to use this label holder with the original high profile frame, the holes must be placed lower (approx 15 mm) so please add an appropriate spacer to the hole template. Using the hole template make sure to rather have the holes within the tolerances of the template a bit further apart from eachother than having them too close. If they are too close, the label holder will warp. For the final hole use a 10 mm drillbit. If you predrilled with 4mm, then use a metal drill bit. A drill bit for wood would make a mess as it cannot center in the hole.