H0 Overhead Catenary System for Märklin M-Gleis
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A custom, no support solution for your tensioned catenary needs.
- Rating
- 0 / 5
- Likes
- 44
- Downloads
- 393
- Makes
- 0
- Views
- 1,890
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles & Machines
- License
- GNU General Public License v3.0
A custom, no support solution for your H0 scale tensioned catenary needs.
Comes with three types of masts: Regular, Tensioner and End-Stop
To make the overhead line sway left and right along the path there are IN and OUT versions of each.
NO SUPPORTS NEEDED. If necessary, rotate the part to lay flat on the bed.
Remove the round tab at the top after printing.
For installation, clip in each mast in the slot of each rail, secure with nails if necessary and then wrap the wire around the lower hook as shown in one of the pictures above. After that is done for each, carefully shift the wire, to put it in tension along the whole length and terminate it at a tensioner or end-stop.