Toyota Rav4 XA30 wiper fluid adapter for silicone funnel lid
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an adapter for Skoda like wiper fluid funnel available on AliExpress.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 14
- Makes
- 0
- Views
- 274
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
This is a custom lid for the Toyota RAV4 XA30 wiper fluid reservoir. The stock opening on the RAV4 is larger than the common Skoda-style funnel lids you see on AliExpress, so I remodeled the cap to fit the RAV4 opening and extended it to work as an adapter for the foldable silicone funnel.
Instructions
The model is designed with print-in-place supports that must be removed after printing. Do not enable slicer supports, as only the built-in ones are needed. Once the print is finished, make a small slit along the long thin wall.

Then you can easily remove the support.

The support side up is where you connect the funnel and the other side should clip-in n the reservoir hose, it should press into place smoothly.

Notes:
- May fit other Toyota models with the same hose.
- The one I bought is not listed anymore but any listing like this should work fine
Printing:
- I have printed with PETG
- Infill: 10% Gyroid
- Line width: 0.42 (Is the thickness of the support wall)
- Layer height: 0.28
- Walls printing order: Outer/Inner