Toyota Rav4 XA30 wiper fluid adapter for silicone funnel lid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an adapter for Skoda like wiper fluid funnel available on AliExpress.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 274
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a custom lid for the Toyota RAV4 XA30 wiper fluid reservoir. The stock opening on the RAV4 is larger than the common Skoda-style funnel lids you see on AliExpress, so I remodeled the cap to fit the RAV4 opening and extended it to work as an adapter for the foldable silicone funnel.
Instructions
The model is designed with print-in-place supports that must be removed after printing. Do not enable slicer supports, as only the built-in ones are needed. Once the print is finished, make a small slit along the long thin wall.

Then you can easily remove the support.

The support side up is where you connect the funnel and the other side should clip-in n the reservoir hose, it should press into place smoothly.

Notes:
- May fit other Toyota models with the same hose.
- The one I bought is not listed anymore but any listing like this should work fine
Printing:
- I have printed with PETG
- Infill: 10% Gyroid
- Line width: 0.42 (Is the thickness of the support wall)
- Layer height: 0.28
- Walls printing order: Outer/Inner