1 / 3
Steering wheel center cover cap simagic
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
Center cover for steering wheels for sim racers or real race cars with QR 70mm.
I designed 3 versions:
- Simagic style - only 3 holes - other holes are hided undeer the cap. You need to use special screws.
- Rounded cap - rounded cap with all 6 holes.
- Simagic style - with 6 holes.
Print Settings :
Recommended for all parts.
If you want the same finish as shown in the photos, print all parts with the front face down on a carbon-textured plate. You can buy this plate from China as sticker or PEI plate.
I printed it with this settings from PLA and PETG-CF all good.
| Layer height | 0.2mm or 0.16 for nice finish |
| Walls | 2 |
| Top layers | 5 |
| Bottom layers | 3-4 |
| Infill density | 15% |
Please share your 3D Prints. Thank you 🙏