Sakura-Marker Cutter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a remix of the marker cutter from mag_sen, thanks for the original design! I changed the slicer and three…
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 22
- Makes
- 0
- Views
- 322
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
This is a remix of the marker cutter from mag_sen(on thingiverse), thanks for the original design!
I changed the slicer and three guide posts because they always snapped when using this design.
Now the guides will be out of three M6 lag bolts(?) and can't snap.
You will need:
-M6x150 (or higher) lag bolts
-Thin wire or fishing line
-Some hotglue to fix the bolts in place
Ich habe die Führungen des Originals und den Slicer geändert, da die immer abgebrochen sind.
Nun bestehen die Führungen aus drei M6 Schlossschrauben, dat hält.
Ihr braucht:
-M6x150 (oder länger) Schlossschrauben
-Dünnen Draht oder Angelschnur
-Etwas Heißkleber für die Schlossschrauben
Print Settings
Printer:
Anycubic i3 Mega
Rafts:
No
Supports:
No
Resolution:
0,2
Infill:
15
Filament:
SUNLU PLA+
White
Post-Printing =============
