Lenovo IdeaCentre mounting bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A bracket for attaching a Lenovo IdeaCentre miniPC to double-c-track (in my case, to an Ender3v2).
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 86
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution
A bracket for attaching a Lenovo IdeaCentre miniPC to double-c-track (in my case, to an Ender3v2).
The model has been updated since my original (pictured) print. The original print was 5mm shorter than intended (math/measuring is hard--oops).
This pairs nicely with M5 x 20 series-TSlot bolt and M5 nut to attach it to the c-track. The mounting hole is 6.5mm, a bit oversized (intentionally) but works well with an M5 bolt and nut.
The top of the bracket has a hole which is intended to be tapped and a plastic M5 bolt installed and snugged against the miniPC case. This hole may need to be drilled out before tapping, depending on how tight your print ends up.