Lenovo IdeaCentre mounting bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A bracket for attaching a Lenovo IdeaCentre miniPC to double-c-track (in my case, to an Ender3v2).
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 86
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
A bracket for attaching a Lenovo IdeaCentre miniPC to double-c-track (in my case, to an Ender3v2).
The model has been updated since my original (pictured) print. The original print was 5mm shorter than intended (math/measuring is hard--oops).
This pairs nicely with M5 x 20 series-TSlot bolt and M5 nut to attach it to the c-track. The mounting hole is 6.5mm, a bit oversized (intentionally) but works well with an M5 bolt and nut.
The top of the bracket has a hole which is intended to be tapped and a plastic M5 bolt installed and snugged against the miniPC case. This hole may need to be drilled out before tapping, depending on how tight your print ends up.