1 / 4
5-Bay 3.5" Hard DriveCage for 120mm Fan Mount — image 1
1 / 4

5-Bay 3.5" Hard DriveCage for 120mm Fan Mount

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

OverviewThis was designed to fit inside this specific case, where it replaced a 12-bay drive cage that is attached to…

Rating
0 / 5
Likes
70
Downloads
216
Makes
0
Views
1,851
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Share Alike

Overview

This was designed to fit inside this specific case, where it replaced a 12-bay drive cage that is attached to some 120mm fan mounts. It might fit fit other cases with similar mounting points, but no guarantees. These each require a SATA backplane (link below) and can be stacked for groups of 5 drives. Here's a link to my video I made that briefly covers the project: https://youtu.be/FZ4wI_7k1Nk

NOTE: To get access to the rear IO of the backplanes, I had to use a rotary tool to cut out section of the case!

The caddies probably need to be printed in PETG because they rely on a flexible locking mechanism, but I printed the cage in PLA. If you want to add on the feet, you should probably print them in TPU.

Instructions:

  • Print out all of the necessary parts--I printed everything at 0.20mm layer height, 3 walls, 15% infill,
  • Attach PCB to Cage using 5 M4x10 bolts and nuts
  • Determine which holes to use to attach to 120mm mounts in the PC case (there are multiple options)
  • Insert heat set inserts with soldering iron
  • (Optional) you can add 4 feet to help with vibrations and stability. Just push 4 of them into place. They fit into the cutouts on the top and bottom.
  • Attach drive cage to PC case with more M4 Bolts
  • Attach HDDs to caddies and then insert into drive bays

Bill of materials (Per 5-Bay cage):

| Item | Quantity | | --- | --- | | Drive Cage (PLA, PETG,etc) | 1 | | Drive Caddy | 5 | | Foot | 4 | | PCB | 1 | | M4x10 Countersunk Screw | 9 | | M4 Nut | 5 | | M4x10 Heat-set Insert | 4 | | 6#-32 HDD Screws | 20 |


Links to Parts:

Category: Electronics

Tags