5-Bay 3.5" Hard DriveCage for 120mm Fan Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
OverviewThis was designed to fit inside this specific case, where it replaced a 12-bay drive cage that is attached to…
- Ocena
- 0 / 5
- Polubienia
- 70
- Pobrania
- 216
- Wydruki
- 0
- Wyświetlenia
- 1851
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
Overview
This was designed to fit inside this specific case, where it replaced a 12-bay drive cage that is attached to some 120mm fan mounts. It might fit fit other cases with similar mounting points, but no guarantees. These each require a SATA backplane (link below) and can be stacked for groups of 5 drives. Here's a link to my video I made that briefly covers the project: https://youtu.be/FZ4wI_7k1Nk
NOTE: To get access to the rear IO of the backplanes, I had to use a rotary tool to cut out section of the case!
The caddies probably need to be printed in PETG because they rely on a flexible locking mechanism, but I printed the cage in PLA. If you want to add on the feet, you should probably print them in TPU.
Instructions:
- Print out all of the necessary parts--I printed everything at 0.20mm layer height, 3 walls, 15% infill,
- Attach PCB to Cage using 5 M4x10 bolts and nuts
- Determine which holes to use to attach to 120mm mounts in the PC case (there are multiple options)
- Insert heat set inserts with soldering iron
- (Optional) you can add 4 feet to help with vibrations and stability. Just push 4 of them into place. They fit into the cutouts on the top and bottom.
- Attach drive cage to PC case with more M4 Bolts
- Attach HDDs to caddies and then insert into drive bays
Bill of materials (Per 5-Bay cage):
| Item | Quantity | | --- | --- | | Drive Cage (PLA, PETG,etc) | 1 | | Drive Caddy | 5 | | Foot | 4 | | PCB | 1 | | M4x10 Countersunk Screw | 9 | | M4 Nut | 5 | | M4x10 Heat-set Insert | 4 | | 6#-32 HDD Screws | 20 |
Links to Parts:
- PCB: https://www.aliexpress.us/item/3256808318459164.html
- M4 Bolts and Nuts: https://amzn.to/4g7ngrG
- Heat Set Inserts: https://amzn.to/3VlSHon
- 6#-32 Screws: https://amzn.to/3UQxWB3
Category: Electronics
