SOVOL SV08 Riser Feet remix for HULA
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an adaptation of InfectedByMax's excellent riser feet for SV08 to fit VoxelPLA's HULA vibration-dampening feet.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 33
- Makes
- 0
- Views
- 455
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
I liked the riser feet for SV08 by @Max_206949. However, I decided to reduce the vibration caused by SV08 and wanted HULA vibration-dampening feet for SV08.
I had an excellent result with HULA system sold by VoxelPLA. So I remixed these riser feet;
https://www.printables.com/model/1052416-sovol-sv08-feet-module
to fit VoxelPLA's K1 series of HULA system.
https://voxelpla.com/products/hula-anti-vibration-damper?variant=45185540161754
Please note: This works only with the K1 series of VoxelPLA's HULA system.
Printing these feet requires support to be enabled in your slicer. I've included a version with built-in support for the bottom of the model. It may not work with your printer if its tolerances are not well-tuned. Please test print one to check before printing all 4 feet. After printing, you can twist off the support with a pair of pliers.
Alternatively, you can use the support that you are comfortable with in your slicer and print the STLs that do not have built-in support.
The screw hole might still require support from the slicer, although I printed them without support on my printer.
I used VoxelPLA's excellent PETG+ for this. Their HULA system is also printed using their PETG+.
You can check out my other models at:
https://www.printables.com/@Toy_Maker_3184077/models
Your “likes” and “boosts” are appreciated.