6812 (60×78×10 mm) 3D-Printable Bearing – Uses 6 mm Airsoft BBs
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a fully 3D-printable 6812 deep groove ball bearing designed to use 6 mm airsoft BBs as the rolling elements.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 118
- Makes
- 0
- Views
- 400
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Engineering
- License
- Creative Commons — Attribution — Noncommercial
his is a fully 3D-printable 6812 deep groove ball bearing designed to use 6 mm airsoft BBs as the rolling elements. It’s meant for light-duty applications, experiments, or just as a fun demo of how bearings work.
I’ve tested it in PLA, PETG, and nylon. All work, but PLA and nylon roll noticeably smoother than PETG. A small amount of light PTFE or silicone grease makes a big difference in reducing friction and wear.
Printing & Assembly Tips
Tolerances: The raceways are sized so 6 mm BBs fit with enough clearance to roll freely. Airsoft BBs can vary a little, so expect best results with higher-grade ones.
Print orientation: Print the races flat on the bed for maximum roundness and strength. Try to position layer seams so they don’t end up inside the raceway.
Infill & walls: Go strong – 80–100% infill with 4–6 perimeters is recommended.
Lubrication: Use PTFE or silicone grease (avoid petroleum-based greases, which may degrade PLA/nylon).
Durability: PLA is fine for light loads and demo use, nylon is best for strength and smoother rolling.
This model isn’t a replacement for a real steel bearing, but it’s a great functional print to play with, test, or use in projects where a traditional bearing isn’t needed.
EXELENT TO USE IN Spirographic WDT TOOL for 54mm.