NexGen3D: Home Assistant Control Panel - Surface Pro Wall Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple aesthetically pleasing wall panel
- Rating
- 5 / 5
- Likes
- 25
- Downloads
- 135
- Makes
- 1
- Views
- 1,388
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
Please Note: This needs a printer with a 300mm x 220mm build area minimum, I designed it to take advatage of the K1 Max printer.
Simple wall mounting system for the Surface Pro Tablet.
I have tested this with the following tablets:
- Surface Pro 3
- Surface Pro 5
I suspect others may fit, but I cant confirm as I do not have access to them.
You can mount vertical or horizontal, its easy to install and remove the tablet from the mount.
When using one of these as a Home Assistant control panel, I recommend enabling Kiosk mode in the BIOS, this will keep the battery at a maximum 50% SOC.
For the OS, I highly recommend Windows 10 or 11 IOT LTSC Enterprise, 11 is a little better for a touch device.
I also recommend using Firefox with the PWA addon, this will give you a better result than a Chrome based browser for local http only GUI's.
I recommend printing the wall mount in a PETG-CF for a little more stiffness, and the bezel from a standard PETG to give it flexibility, but you can also use PLA+ if you like, mine is printed in PETG-CF and the bezel is printed in a Matte White PETG-GF.