Ender 3 Neo - Heat Sink Shroud
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A heat sink shroud to mount a 4010/4020 axial fan directly to the Ender 3 Neo.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 14
- Makes
- 0
- Views
- 63
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
A heat sink shroud to mount a 4010/4020 axial fan directly to the Ender 3 Neo.
I started printing with ABS and the original shroud let a lot of air flow around the nozzle and onto the printed part. This caused a lot of warping in my prints.
This shroud screws onto the mounting holes on the back plate and wraps between the heatsink and the heater block so that minimal airflow goes onto the print. Air now flows through the slots in the side.
I've used M3 nuts in the back of the shroud to screw in the fan. If the space is too tight, use a soldering iron to push the nuts in (like a heat set insert).
Printed using ABS.