Noctua NF-A6x15 fan mount for PlayStation 2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
For SCPH-5000x models, as the one on Thingiverse (https://www.thingiverse.com/thing:6893848) doesn't fit.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 34
- Makes
- 0
- Views
- 330
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I printed this mount from Thingiverse for my SCPH-5000x but quickly found out that the spacing for the holes doesn't fit for my model. So I quickly designed my own version that fits snuggly inside my model.
The SCPH-5000x fan is actually not much louder than the Noctua so this mod is highly optional IMO and I'd only do it for fun or when the original fan died. I do NOT know if this mount will fit for other PS2 fat models. But it is a quick 15 minute print, so you might as well just try.
It should be compatible with other 60x15mm fans, but why would you buy something other than Noctua, amirite?
The 3mf file has the same settings I used and printed with Prusament PETG, I'd recommend against printing this with PLA as the PS2 can get a bit warm which will likely warp PLA over time.
FYI for the Noctua NF-A6x15 (5V) you should NOT use the original fan header. You'd have to add a buck converter or simply use the power from the USB ports. You can trace back the power with a multimeter to the LDO regulator which supplies the necessary 5V. On my V9 board I found some densly packed vias which were on the same rail so I soldered a 3pin fan adapter to that so the fan mod is fully reversible.
On V9 boards (GH-023) there is a NCP631GD2T which supplies the 5V and 3.0A max. You might use one of the 78M05 regulators but they don't have as much headroom.