1 / 12
Bosch GAS 35 L <=> Starmixx Dustfixx Adapter — image 1
1 / 12

Bosch GAS 35 L <=> Starmixx Dustfixx Adapter

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A 3D-printed adapter set for connecting a Starmixx Dustfixx pre-separator to a BOSCH GAS 35 L vacuum cleaner.

Rating
0 / 5
Likes
7
Downloads
70
Makes
0
Views
1,084
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial — Share Alike

A 3D-printed adapter set for connecting a Starmixx Dustfixx pre-separator to a BOSCH GAS 35 L vacuum cleaner. In my example, I have also integrated a drawer for storing frequently used suction adapters, etc. However, the adapters can just as easily be mounted on a wooden board.

The adapter set consists of remixes of the following parts as well as custom-made parts.

  • I remixed this adapter set: thanks @bennowolf 
    https://makerworld.com/en/models/1052579-l-boxx-workbench-plate-holder
    • Changes to the original design: The operating concept has been revised so that no cutout is required in the board; instead, the locking mechanism can be operated from the front. I have also adjusted the tolerances and fit.
    • Parts needed for assembly:
      • 6x M3x6
      • 6x Ruthex M3 threaded insert
      • 2x 6x30 spring (I used 0.5x6x30)
  • I created the adapter set to mount the Dustfixx to the wooden board
    • Parts needed:
      • 4x 5x20mm spring (I used 0.5x5x20)
      • Woodscrews to secure the adapters to the wooden board
  • I remixed this connection hose adapter: thanks @tapani.siivo
    https://makerworld.com/en/models/167516-bosch-gas35-hose-connector
    • Changes made to the original design: removed the “nose” and changed the fit, so that it can be connected to the Dustfixx intake.

Tags